Eizo ColorEdge CG279X, Руководство пользователя

Страница: 15 / 55

15
Chapter 3 SelfCalibration
Chapter 3 SelfCalibration
This product is equipped with a built-in calibration sensor. By setting the calibration targets and execution
schedule in advance, the calibration sensor automatically operates and regularly calibrates the monitor. This
automatic calibration function is called "SelfCalibration".
The adjustment content of SelfCalibration differs depending on the color mode that is executed.
• Standard Mode (color mode excluding "CAL"): the monitor's color reproduction gamut is updated
and the display mode in each mode is adjusted as follows:
- The temperature is adjusted so that it is as close as possible to the specified value.
- The gamut values are adjusted so that they are close to each specified value.
- Information on brightness is updated.
• Advanced Mode (color mode "CAL"):
- When performing SelfCalibration on the monitor itself, calibrate the monitor to match the set
targets.
- When using ColorNavigator 7, use a measurement device with the software to maintain the
calibrated state of the monitor.
Note
• SelfCalibration can be executed 30 minutes after turning on the monitor.
• SelfCalibration can also be executed when there are no external device signals being input.
• To preserve adjustments that you set by using ColorNavigator 7, it is recommended to execute SelfCalibration.
• Because brightness and chromaticity will change as you use the monitor, it is recommended to calibrate the monitor
periodically.
• The measurement results from the built-in calibration sensor can be correlated with the measurement results from
the external measurement device that you want to use as a reference. For details, refer to the ColorNavigator 7
User's Manual.
You can set the calibration targets and execution schedule by using ColorNavigator 7 or the monitor's
Setting menu.
You can download the ColorNavigator 7 software and User's Manual from our website:
www.eizoglobal.com
Note
• When using the software, you will need to connect a PC to the monitor with the supplied USB cable.
• For details on the USB cable connection, see
"Connection Procedure" (page 50) .
• While using the software, do not operate the power switch or operation switches on the front side of the monitor.