Eizo ColorEdge CG248-4K, Руководство пользователя

Страница: 48 / 88

- 48 -
Chapter 5 Troubleshooting
5-3. Other problems
Problem Possible cause and remedy
1. The Setting menu/Mode menu cannot be
displayed
• Check whether the operation switch lock function works (see “Key Lock” (page 43) ).
• Operation switches are locked when ColorNavigator is running. Exit the software.
2. The monitor connected with the USB cable
is not detected. / USB device connected to
the monitor does not work.
• Check whether the USB cable is connected correctly (see “6-4. Making Use of USB (Universal Serial Bus)” (page 55) ).
• If a peripheral device is connected to the “CHARGE” port, try checking the “USB CHARGE Port” setting
(see “USB CHARGE Port” (page 39) ). If it is set to “Charging Only”, the peripheral device will not work.
• Try changing to a different USB port. If the PC or peripheral devices works correctly by changing the USB port, contact
your local EIZO representative. (Refer to the manual of the PC for details.)
• Reboot the PC.
• If the peripheral devices work correctly when the PC and peripheral devices are connected directly, contact your local
EIZO representative.
• Check whether the PC and OS are USB compliant. (For USB compliance of the respective devices, consult their
manufacturers.)
• Depending on the USB 3.0 host controller that you are using, connected USB devices may not be recognized correctly.
Update to the latest USB 3.0 driver provided by each manufacturer, or connect the monitor to the USB 2.0 port.
• Check the PC’s BIOS setting for USB when using Windows. (Refer to the manual of the PC for details.)
3. Audio is not output. • This monitor does not support the HDMI/DisplayPort audio signals.