Eizo ColorEdge CG248-4K, Руководство пользователя

Страница: 33 / 88

- 33 -
Chapter 3 Advanced Adjustments/Settings
Function
Input Signal
(The setting range of each
function differs depending
on the input signal.)
√: Settable -: Not settable
Adjustable
range
Description Note
DisplayPort
HDMI
PC
signal
Video
signal
Picture Expansion √ √ - Full Screen
Aspect Ratio
Dot by Dot
The screen size of the monitor display can be changed.
• “Auto”
The monitor automatically changes the screen size
according to the resolution information and aspect ratio
information sent from the input signal.
• “Full Screen”
Displays an image in full screen. Images are distorted in
some cases because the vertical rate is not equal to the
horizontal rate.
When using video signal (480p/i, 576p/i) input, the image
will be displayed in full screen while maintaining the 16:9
aspect ratio.
• “Aspect Ratio”
Displays an image in full screen. However, since aspect
ratios are maintained, part of an image may not be visible
in horizontal or vertical direction.
When using video signal (480p/i, 576p/i) input, the image
will be displayed in full screen while maintaining the 4:3
aspect ratio.
• “Dot by Dot”
Displays the image at the set resolution or at the size
specified by the input signal.
• Example settings
- Full Screen
- Aspect Ratio
- Dot by Dot (input signal)
• When “Dot by Dot” is se -
lected during 4096 x 2160
signal input for the CG248-
4K, this exceeds the high -
est resolution that can be
displayed by the LCD panel,
so the left and right edges
of images cannot be dis -
played.
- - √ Auto
Full Screen
Aspect Ratio
Dot by Dot