GB
GB
- 26 -
are correctly attached and correctly used.
The use of a dust extraction system can redu-
ce the danger posed by dust.
4. Usage and treatment of the electric tool
a) Do not overload the appliance. Use the
correct tool for your work.
You will be able
to work better and more safely within the gi-
ven performance boundaries.
b) Do not use an electric tool with a defec-
tive switch.
An electric tool that cannot be
switched on or off is dangerous and must be
repaired.
c) Pull the plug out of the socket and/or
remove the battery before making any ad-
justments to the appliance, changing ac-
cessories or put the appliance down.
This
safety measure prevents starting the electric
tool unintentionally.
d) Keep unused electric tools out of the
reach of children. Do not allow people
who are not familiar with the appliance or
who have not read these instructions to
use the appliance.
Electric tools are dange
-
rous if they are used by inexperienced people.
e) Clean your electric tool carefully. Check
whether moving parts are functioning
properly and not jamming, whether parts
are broken or damaged enough that the
functioning of this electric tool is affec
-
ted. Have damaged parts repaired before
using the appliance.
Many accidents are
caused by badly maintained electric tools.
f) Keep your cutting tools sharp and clean.
Carefully maintained cutting tools with sharp
cutting edges will jam less and are easier to
control.
g) Make sure to use electric tools, accesso-
ries, attachments, etc. in accordance with
these instructions. Take the conditions in
your work area and the job in hand into
account.
Using electric tools for any purpose
other than the one for which they are intended
can lead to dangerous situations.
5. Service
a) Have your electric tool repaired only by
trained personnel using only genuine
spare parts.
This will ensure that your elec-
tric tool remains safe to use.
Safety Information for all Applications
a) This electric tool is designed for use as a
grinder/sander and cutting-off machine.
Obey all the safety instructions, general
instructions, illustrations and data sup-
plied with the tool.
If you fail to obey the fol-
lowing instructions, you may suffer an electric
shock, fire and/or serious injuries.
b) This electric tool is not designed for
sanding, working with wire brushes or
polishing.
Use of the electric tool in ways it
was not intended could lead to dangerous
situations and injuries.
c) Do not use any accessories which have
not been designed and recommended
by the manufacturer specifically for this
electric tool.
Just because you can attach an
accessory to your electric tool, this does not
guarantee that you can use it safely.
d) The maximum speed of the plug-in tool
must be at least as high as the maximum
speed specified on the electric tool.
Ac
-
cessories which rotate faster than the maxi-
mum speed may break and be catapulted out
of the tool.
e) The external diameter and thickness of
the plug-in tool must comply with the
dimension specifications of your electric
tool.
Plug-in tools of the wrong size cannot be
adequately screened or checked.
f) Grinding wheels, flanges, grinding disks
or other accessories must fit precisely on
the grinding spindle of your electric tool.
Plug-in tools which do not fit exactly on to the
grinding spindle of the electric tool will rotate
irregularly, vibrate a great deal and may result
in you losing control.
g) Do not use damaged plug-in tools. Before
use, check plug-in tools such as grin-
ding/sanding wheels for splintering and
cracks, grinding/sanding disks for cracks,
wear or heavy wear, and wire brushes for
loose or broken wires. If the electric tool
or the plug-in tool is dropped, check whe-
ther it is damaged or use an undamaged
plug-in tool. When you have checked and
fitted the plug-in tool, make sure that you
and other persons in the vicinity are not
on a level with the rotating plug-in tool
and allow the electric tool to run for one
minute at maximum speed.
Damaged plug-
in tools will generally break during this test
time.
h) Wear personal protection equipment. Use
face guards, eye protection or goggles
depending on the application. If reaso-
nable, wear a dust mask, ear protection,
safety gloves or special aprons to keep
small grinding and material particles
away from you.
Protect your eyes from flying
foreign bodies which may be created by a
range of applications. Dust masks or respi-
ration masks must filter the dust generated
by the application. If you are exposed to loud
noise for a lengthy period of time, you may
suffer hearing loss.
i) Ensure that others keep a safe distance
away from where you are working. Any-
body who enters the area must wear
personal protection equipment.
Pieces of
the workpiece or broken plug-in tools may be
catapulted into the air and cause injuries even
outside the immediate vicinity of where you
are working.
j) Hold the tool only by the insulated hand-
les when carrying out work during which
the plug-in tool could strike concealed
power cables or its own mains lead.
Con-
tact with a live cable will also make the metal
parts of the tool live and will cause an electric
shock.
k) Keep the power cable away from rotating
plug-in tools.
If you lose control of the ma-
chine, the mains lead may be cut or caught
and your hand or arm might be pulled into the
rotating plug-in tool.
l) Never put the electric tool down until
the plug-in tool has reached a complete
standstill.
The rotating plug-in tool may
come into contact with the surface on which
you place it which could result in you losing
control of the electric tool.
m) Never leave the electric tool running
whilst you are carrying it.
Your clothing can
come into contact with the rotating plug-in
tool and the plug-in tool could thus bore into
your body.
n) Clean the ventilation slots on your elec-
tric tool at regular intervals.
The motor
fan draws dust into the housing and a heavy
accumulation of metal dust can pose electric
risks.
o) Never use the electric tool in the vicinity
of inflammable materials.
Sparks may igni-
te these materials.
p) Do not use any plug-in tools which requi-
re liquid coolant.
Use of water or other liquid
coolants could result in electric shocks.
Anl_SA_TC AG 115_1_SPK8.indb 26
Anl_SA_TC AG 115_1_SPK8.indb 26
01.10.2020 14:02:54
01.10.2020 14:02:54
