GB
- 15 -
•
Air eccentric sander/grinder
•
Open-ended wrench
•
Abrasive paper, grit size 80 (2x)
•
Abrasive paper, grit size 100 (2x)
•
Abrasive paper, grit size 120 (2x)
•
Original operating instructions
3. Proper use
The equipment is designed for the sanding/grin-
ding of wood, iron, plastic and similar materials
using the appropriate sanding/grinding paper.
The equipment is not suitable for wet sanding/
grinding.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Technical data
See warranty card of your country.
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
Wear ear-mu
ff
s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 60745.
Warning!
The speci
fi
ed vibration value was established in
accordance with a standardized testing method.
It may change according to how the equipment
is used and may exceed the speci
fi
ed value in
exceptional circumstances.
The speci
fi
ed vibration value can be used to com-
pare the equipment with other power tools.
The speci
fi
ed vibration value can be used for initi-
al assessment of a harmful e
ff
ect.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect con-
ditions.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
Residual risks
Even if you use this power tool in accordance
with instructions, certain residual risks can-
not be rules out. The following hazards may
arise in connection with the equipment’s con-
struction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.
3. Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.
5. Before starting the equipment
Before you connect the equipment to the power
supply, make sure that the data on the rating plate
are identical to those of the supply voltage.
Disconnect the compressed-air supply be-
fore performing any cleaning, adjusting and
maintenance work.
5.1 Lubricating the tool
Each time before starting and during prolonged
operation:
•
Insert 3-6 drops of special compressed-air oil
into the compressed-air connection (5)
•
Let the equipment run briefly so that any sur-
plus oil is blown out.
5.2 Fitting the dust extractor adapter
(Figure 6)
Connect the dust extractor adapter to a suitable
dust extraction system.
Important!
For health safety reasons it is imperative that you
use a dust container or a dust extraction system.
Anl_SA_DSE_125_SPK8.indb 15
Anl_SA_DSE_125_SPK8.indb 15
22.11.2016 07:41:07
22.11.2016 07:41:07
