![background image](http://html1.mh-extra.com/html/einhell/40-206-20/40-206-20_original-operating-instructions_2370155016.webp)
GB
- 16 -
Danger!
When using the equipment, a few safety pre-
cautions must be observed to avoid injuries and
damage. Please read the complete operating
instructions and safety regulations with due care.
Keep this manual in a safe place, so that the in-
formation is available at all times. If you give the
equipment to any other person, hand over these
operating instructions and safety regulations as
well. We cannot accept any liability for damage
or accidents which arise due to a failure to follow
these instructions and the safety instructions.
1. Safety regulations
The corresponding safety information can be
found in the enclosed booklet.
Warning!
Read all the safety information, instructions,
illustrations and technical data provided on
or with this power tool.
Failure to adhere to the
following instructions may result in electric shock,
fi
re and/or serious injury.
Keep all the safety information and instruc-
tions in a safe place for future use.
This appliance is not intended for use by persons
(including children) with reduced physical, sen-
sory or mental capabilities, or lack of experience
and knowledge, unless they have been given
supervision or instruction concerning use of the
appliance by a person responsible for their safety.
Children should be supervised to ensure that they
do not play with the appliance.
2. Layout and items supplied
2.1 Layout (Fig. 1-4)
1. Intake air
fi
lter
2. Pressure
tank
3. Wheel
4. Supporting
foot
5. Quick-lock coupling (regulated compressed
air)
6. Pressure gauge (for reading the preset tank
pressure)
7. Pressure
regulator
8. ON/OFF
switch
9. Transport
handle
10. Safety valve
11. Drainage screw for condensation water
12. Pressure gauge (for reading the tank pressu-
re)
13. Quick-lock coupling (unregulated com-
pressed air)
14. Non-return valve
15. Overload switch
16. Hexagon key 5 mm
17. Socket head screw for handle
18. Hexagon screw for supporting foot
19. Washer for supporting foot
20. Nut for supporting foot
21. Wheel cap
22. Axle screw
23. Washer
24. Spring washer
25. Nut
2.2 Items supplied
Please check that the article is complete as
speci
fi
ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or su
ff
ocating!
•
Compressor
•
Intake air filter (2x)
•
Wheel (2x)
•
Supporting foot (2x)
•
Transport handle
•
Hexagon key 5 mm
•
Socket head screw for handle (4x)
•
Hexagon screw for supporting foot (2x)
•
Washer for supporting foot (2x)
•
Nut for supporting foot (2x)
•
Wheel cap (2x)
Anl_TE_AC_50_Silent_SPK9.indb 16
Anl_TE_AC_50_Silent_SPK9.indb 16
15.07.2020 13:18:50
15.07.2020 13:18:50
Содержание 40.206.20
Страница 118: ...GR 118 Anl_TE_AC_50_Silent_SPK9 indb 118 Anl_TE_AC_50_Silent_SPK9 indb 118 15 07 2020 13 19 30 15 07 2020 13 19 30...
Страница 128: ...128 Anl_TE_AC_50_Silent_SPK9 indb 128 Anl_TE_AC_50_Silent_SPK9 indb 128 15 07 2020 13 19 32 15 07 2020 13 19 32...
Страница 129: ...129 Anl_TE_AC_50_Silent_SPK9 indb 129 Anl_TE_AC_50_Silent_SPK9 indb 129 15 07 2020 13 19 32 15 07 2020 13 19 32...