Eiki CS-Wi4 manual
Page
14
Adding control actions
You are programming a CS-Wi4 to replace
several remote controls and simplify the
operation of a system. In this case, when
you select VCR, you will need to:
1. Switch on the projector
2. Switch on the AV receiver
3. Select “Video” on the AV receiver
4. Switch on the VCR
5. Select Video on the projector.
You can program the “
VCR
” key to do all
this automatically while at the same time
it selects the VCR control screen.
Here’s how to do it:
Press
Add
to add a
code sequence. The
Code Sequencer window
will appear.
Choose
Load New
Codeset.
Locate the
codeset for the
projector and select
Open
. (You only need
to add a codeset once
for each device).
Choose the
On
code.
Because the projector
will need a few seconds
delay between its
Power On
and an
Input Select
command, add as many
other commands as you
can to execute during
this delay. Add some
extra delays as well.
Short delays between
commands are a wise
extra precaution.
However
, if the
projector needs more
than a few seconds
delay, it’s better to add
a separate
Power On
button on the main
menu.
