18
Behaviour at malfunction
Turn off the machine by malfunction and disconnect from the
electricity network. Operations on the electrical system of the
machine can be executed only by a specialist.
Trouble shooting
Warranty
According to the general supply conditions for business dealings, suppliers have
to provide to companies a warranty period of 12 months for redhibitory defects.
(to be documented by invoice or delivery note)
Damage due to natural wear, overstressing or improper handling are excluded
from this warranty.
Damages due to material defects or production faults shall be eliminated free of
charge by either repair or replacement.
Complaints will be accepted only if the tool is returned in non-dismantled
condition to the manufacturer or an authorized Eibenstock service centre.
Declaration of conformity
It is necessary that the machine (e.g.: PLD 160) used in this drill rig comply with
the requirements which are described in the specifications of the drill rig (f. e.
drilling diameter, fixture of the motor).
We declare that this unit has been designed in compliance with 2006/42/EC.
This unit must not be put into service until it was established that the Power Tool
to be connected to this unit is in compliance with 2006/42/EC (identified by the
CE-marking on the Power Tool).
Vakuum Technik GmbH Eibenstock
Lothar Lässig
23.05.2013
malfunction
possible cause repair
Drill unit has to much
play (vibration)
stand has been loose
guidance has to much play
thrust piece worn
adjust the wing nut
adjust guidance (see page 18)
replace the thrust piece
Содержание PLB 160
Страница 2: ...1 ...
Страница 20: ...19 Ihr Fachhändler Your distributor Vakuum Technik GmbH Am Steinbächel 3 08309 Eibenstock ...