13
Use
After each readjustment always check that the screws are tightly
fixed so that safe operating of the drill rig is possible.
Mounting the turnstile
■
Mount the turnstile (1) on
the right or left side of the
carriage (2) depending on
the work to be performed.
■
Check whether the turnstile
(1) is fixed tightly.
Fastening of the drill rig
Fastening on the floor by means of vacuum
Don’t use the vacuum mounting on the wall and overhead!
For a low-pressure mounting the surface where the base is mounted must be
not porous and must be flat and free of cracks.
If this is not the case, this kind of mounting can’t be used. For the vacuum
mounting you need a vacuum pump, a vacuum hoses (see illustration) and
the vacuum set PLB 160. These items are available on request.
1
2
Mount the vacuum grip on the drill rig base
with the included screw and washer.
Put the rubber seal in the groove underside of
the base.
Содержание PLB 160
Страница 2: ...1 ...
Страница 20: ...19 Ihr Fachhändler Your distributor Vakuum Technik GmbH Am Steinbächel 3 08309 Eibenstock ...