15
Fastening by means of quick action bracing unit
In order to brace the drill rig by means of the quick action bracing unit, the
distance to the opposite wall must be between 1,7 m and 3 m.
Position the drill rig. Position the quick action bracing unit
as close as possible behind the support on the base of the
rig. Fix the drill rig by turning the crank (G) clockwise.
Secure in position by means of the appropriate bolt (H).
Attention! It is important, that the drill rig is firmly connected to the
surface. If not fixed correctly, injuries to the operator or damages to the
drilling unit may be caused. Uncontrolled movements during drilling will
cause the drill bit to hit the surface to be drilled which may lead to a
chipping of the segments. The drill bit might also tilt in the bore hole
which consequently will damage it.
Fixing the core drill motor
Mounting the core drill machine
The machine holder has a special quick connection fixture for the machine
Thereby the prism on the gear box of the machine will be insert from above in
the dovetail fixture of the machine holder and braced firmly by the clamp hand
gear on the side.
For operation with the core drill machine you have to attend the operating
instructions and the safety indications!
Wear protective gloves!
Caution! When mounting the machine, risk
of squashing.
G
H
Содержание PLB 160
Страница 2: ...1 ...
Страница 20: ...19 Ihr Fachhändler Your distributor Vakuum Technik GmbH Am Steinbächel 3 08309 Eibenstock ...