EHA
Transprint HP 2010
Chapter: User manual Version: 01 Date: 02-12-2016
File: BAL-QS-004/ENG Page
16
of
23
Release: M. Klein
► The roller will continue to rotate for about 20 minutes to cool down.
(The control panel will show
COOLDOWN
in the display)
► After the Cooldown phase the machine will turn off and go into standby mode (The
control panel will show
OFF
in the display).
► Do not remove the power supply cable from the socket until the roller is
completely cooled down and maintenance work on the machine must be carried
out!
►Without power supply 230V the clock runs for maximum 2 days on emergency stream.
6.7 Winding up-Brake
Adjustment of the tension of winding up
The brake tension can be put by shifting the clamping ring. A good base setting is given if
with running winding motor the winding up brake is set that the winding up roll does not run
along any more.
The securing pin must be in operation in the arbor before the clamping ring is released.
Clamping ring
Operating button
Securing pin
