EHA
Transprint HP 2010
Chapter: User manual Version: 01 Date: 02-12-2016
File: BAL-QS-004/ENG Page
14
of
23
Release: M. Klein
6.2 Insert foil
.
If the machine has already been in operation and the working
temperature has been reached the roller and the roller heating cover will
be hot.
► P
ull the power plug of the machine before working with the foil.
► Insert the foil roll on the unwind shaft to the right of the roller, so that the foil runs to the
left.
► Feed the foil under the spring loaded in feed plate, put the foil under the roll around the
square bar, over the round bar, further around the next guiding shaft to the wind up unit.
► Attach the foil on the bottom left to the core already fitted on the wind up shaft by means
of sticky tape.
► Press the guiding flange against the core to clamp the core to the shaft.
► Align everything straight and free of wrinkles in the foil!
► Load the foil roll on the unwind shaft with a guiding flange.
►
Clip on the pressure spring. Pretension the pressure spring with the adjusting ring so far
that the winding motor can not pull the foil roll straight.
► Connect the power cable.