EHA
Transprint HP 2010
Chapter: User manual Version: 01 Date: 02-12-2016
File: BAL-QS-004/ENG Page
7
of
23
Release: M. Klein
2
SAFETY
The
EHA
Transprint HP 2010
is provided with safety equipment to ensure safe machine
operation. You should, however, take due note of the following:
Danger of getting injured by hot parts.
Be careful with hot parts to avoid burns. The heated roller may have a
surface temperature of 220°C. Do not touch the rollers. Even after the
machine had been switched off, the roller will remain hot for a long time.
Danger of getting injured by rotating parts.
The machine is provided with a cover (protection cage) which are designed to
prevent contact with rotating parts. Make sure that this safety device is
always installed during operation of the machine
.
Danger of getting injured by voltage.
Do not remove the back panels of the
EHA
Transprint HP2010, you may get
injured by voltage. Only remove the panels to carry out maintenance. In this
case be sure that the machine is de-energized.
Do not place heavy objects on the power supply cord.
2.1 Obligations of the owner
The owner of the machine has to make sure that the only people allowed to work with and
on the machine have understood and confirmed by their signature the basic regulations on
workplace safety and accident prevention. The owner will make sure that the personnel is
trained in the handling of the machine and have been familiarized with the operating and
safety instructions contained within this manual. The safety awareness of personnel shall
be reviewed at regular intervals.
2.2 Obligations of the personnel
All individuals working with and on the machine commit, and confirmed by their signature,
to be familiar with the basic regulations on workplace safety and accident prevention and
have read the section on safety contained within this manual.