EHA
Transprint HP 2010
Chapter: User manual Version: 01 Date: 02-12-2016
File: BAL-QS-004/ENG Page
8
of
23
Release: M. Klein
2.3 Dangers caused by operation of the machine
The
EHA
Transprint HP2010
is built according to accepted engineering standards and
safety regulations. Despite that operating the machine could result in danger for life and
limb of the operator or bystander or cause damage to the equipment or other property.
The machine shall be used only:
►For the intended use.
►In absolutely perfect condition.
Malfunctions or damage that may affect the safety must be serviced immediately.
2.4 Intended use
The
EHA
Transprint HP2010 is designed exclusively for the hot stamping of designated
vehicle number plates with embossing edges.
Any different or additional use of the machine is considered improper.
EHA
Hoffmann International GmbH is not responsible for any resulting damage to machine
or individuals.
2.5 Safety features
Before start-up of the machine, make sure that the protection case is closed properly.
The Safety cover may only be removed when the machine is at a complete stop and
powered down.
2.6 Informal safety measures
The operating instructions must be kept with the machine.
In addition to the operating instruction, the local accident prevention regulations and
environmental regulations should be available and to be noted by the operator.
All safety instructions and warning pictograms must remain in legible condition.
2.7 Machine operating system
Do not make any modifications to the operating system of the machine under any
circumstances!
Settings on the timer and temperature shall be permitted only by qualified personnel.