Chapter 9: Network Configuration
egnite Querx can be connected to a network via an Ethernet LAN cable. The
WLAN models can additionally be connected to wireless networks.
The Ethernet interface needs to detect a network connection, in order to activate
the wired network interface. If no Ethernet connection is detected, or an existing
one is disrupted, Querx WLAN will activate the wireless network interface.
Ethernet Interface
In default settings Querx configures the wired network connection automatically.
This is referred to as dynamic configuration, as it is newly configured each time
the device is booted, which can change the settings.
Alternatively, the network settings can be configured manually. Manually
assigning a static IP-address to the device will make it boot more quickly and also
make it accessible at the same IP-address at all times.
ℹ
Information
Changes to the network settings will only be applied after the
device has rebooted.
Open the configuration page
System / Network
to set up the dynamic or static
network configuration.
1.
Click the
Edit
symbol next to the entry
Ethernet
to configure this interface.
40
