Reboot when Establishing an Ethernet Connection
egnite Querx can function as a data logger when it is not connected to a network.
The tracked data can be retrieved at a later date, when the connection is re-
established.
If an Ethernet cable is plugged into a running device, it will reboot. A reboot will
also be triggered if the connection is interrupted and re-established at a different
point. A further cause for a reboot could also be a temporary loss of power of the
connected Ethernet switch.
Resetting the Configuration
There are two ways of resetting the configuration to the factory settings, via the
web interface or a hardware button.
When the configuration is reset via the web interface, the network settings will
remain unchanged. This function can be used if any changes to the configuration
require a reboot.
When the configuration is reset via the reset button, all settings, including the
network configuration, are reset and the device is returned to factory settings
entirely. This function is primarily used if Querx is no longer accessible via the
network.
Resetting the Configuration Via the Web Interface
Open the page
Maintenance / Reset
in the configuration area.
1.
Click the button
Reset configuration
.
2.
Confirm that you want to reset the configuration by clicking
Yes
on the
following page.
The device will now reboot with the ex works configuration active.
104
