1
3
13
2
Operator’s Manual City Ranger 2250 Lawn edger
Replacing the wearing bar
1. Lift the lawn edger up by pulling the joystick back.
2. Stop the machine.
3. Detach the guard by removing the wing nut under the
guard. (Picture 1)
4. Remove the bolt that holds the guard. (Picture 2)
5. Remove the end piece, pipe and guard. (Picture 2)
6. Remove the nuts and bolts that hold the wearing bar
and remove the wearing bar. (Picture 3)
7. Fit a new wearing bar in the opposite order. The milled
edge of the wearing bar should be facing the blade and
towards the axle. (Picture 3)
New cultivator blades, blades and wearing bar can be
ordered from an authorised Egholm distributor.
Winter storage:
When it is time to store the lawn edger for the winter, the
following steps are recommended:
1. Remove any loose paint and repaint any damaged areas.
2. Spray the lawn edger with protective lubcricant.
Removing the bolt
Detaching the guard
Screws that hold the wearing bar
Service and maintenance
