EGAmaster 79617, Руководство по эксплуатации

Страница: 4 / 58

4
Avoid sparks in hazardous environment - created by the saw blade. Always flush material and
saw blade for cooling with sufficient water during working.
Do not employ machines by excessive force. Their performance is better and safer, if they work
at the prescribed speed.
Check damaged parts.
Before using the machine, damaged parts or protective devices should be carefully checked to
make sure they work soundly and fulfil the designated function. Check alignment, connections
and attachment of moving parts. Also check if parts are broken. Parts or protective devices that are
damaged should, if nothing else is mentioned in these operating instructions, only be exchanged
or repaired by qualified personnel. The same applies to defective switches and valve triggers. If the
machine cannot be switched on or off with the valve trigger, it should not be used.
The use of other accessories, or other additional items than recommended in these operating
instructions, may include the risk of bodily injury.
Only operate the tool after a thorough training or under supervision of a trainer.
Never exceed the maximum operation pressure.
Follow the valid national provisions in the country of application.
ATTENTION! Never use the flexible hose as a lifting handle!
USE
INTENDED USE
Skilled personnel only is allowed to operate the machine.
The machine (reciprocating saw) serves for cutting (shortening, cutting off to length) of different
materials and profiles. Mainly the saw will be used fixed in a clamping device that is
corresponding to the intended purpose.
But cutting without clamping device is also possible!
IMPROPER USE
Any use deviating from the intended use as described is considered to be improper use.
Working without personal protection equipment.