Efka euramot AB60D1472, Руководство пользователя

Страница: 61 / 68

EFKA AB60D1472 63
Technician Level
Code no. 190 with control operation
Parameter Designation Unit max min Preset Ind.
146 0 = Signal high lift for walking foot Off 3 0 0 A
1 = Signal h i gh lift for walking foot at output M1
2 = Signal high lift for walking foot at output M2
3 = Signal high lift for walking foot at output M3,
if parameter 297 = 0
The connection of adapter cord and high lift walking
solenoid may have to be corrected according to the
setting of outputs M1...M3. See connection diagram and
adapter cable routing!
147 0 = Signal machine running Off (exception M5) 3 0 0 *) A
1 = Signal machine running at output M1
2 = Signal machine running at output M2
3 = Signal machine running at output M3,
if parameter 297 = 0
The connection of adapter cord and solenoid valve
machine running may have to be corrected according to
the setting of outputs M1...M3. See connection diagram
and adapter cable routing!
148 0 = Signal backtacking Off 3 0 0 *) A
1 = Signal backtacking at output M1
2 = Signal backtacking at output M2
3 = Signal backtacking at output M3,
if parameter 297 = 0
If parameter 290 = 7, the selected output takes the
function chain suction .
The connection of adapter cord and backtacking
solenoid may have to be corrected according to the
setting of outputs M1...M3. See connection diagram and
adapter cable routing!
152 thP Run-out time of the high lift walking speed ms 500 80 150 A
153 Braking power at machine standstill 50 0 10 *) A
155 Mode signal “run” 3 0 1 A
0 = Signal Off.
1 = Signal “run” On.
2 = Signal “run” switched on when the speed is
>3000 RPM.
3 = Signal with pedal <> 0.
156
t05 Switch-off delay for the signal “run” ms 2550 **) 0 0 A
161 Direction of motor rotation 1 0 1 *) A
0 = Clockwise rotation
1 = Counterclockwise rotation
172 POS Display on the control:
Pos. 1 to 1A (LED 7 lights up)
Pos. 2 to 2A (LED 8 lights up)
173 Checking of the signal outputs and inputs using the
incorporated control panel
01 = Free on socket ST2/34
02 = Sewing foot lifting on socket ST2/35
03 = Output M1 on socket ST2/37
04 = Output M3 on socket ST2/27
05 = Output M2 on socket ST2/28
06 = Free
07 = Output ML or M5 on socket ST2/32
OFF/ON = By actuating the switches connected to the
control, the function of these switches is
checked and displayed on the control.
OFF is displayed with open switch and ON
with closed switch.
*) Depending on the selected mode. See table at the beginning of the List of Parameters!
**) When programming the 3-digit or 4-digit control parameter values, the 2-digit or 3-digit value displayed must be
multiplied by 10.