EFKA AB60D1472
6
Explanation of letter symbols of the previous page and chapter ”Timing Diagrams“
Outputs:
Inputs:
FL
= Sewing foot lifting
NHT
= Needle up/down
FA1
= Thread trimmer pos. 1...1A
EST
= Single stitch
FA2
= Thread trimmer pos. 1A...2
FLEX
= External sewing foot lifting
FA1+2
= Thread trimmer pos. 1...2
N.POS
= Positioning speed
FSPL
= Thread tension release
N.AUTO
= Automatic speed
FA-R/FA-V
= Thread trimmer backward/forward
N9.AU
= Automatic speed n9
ML
= Machine running
N12.AU
= Automatic speed n12
FW
= Thread wiper
LSP
= Machine run blockage
AH/AH1/AH2 = Tape cutter / Tape cutter 1/ Tape cutter 2
DR-UK
= Reversal of motor rotation
DR-UK
= Reversal of motor rotation
NH
= Needle up
PD=0
= Pedal step 0
POS2
= Run to position 2
PD-2
= Pedal step -2
DB
= Speed limitation n12
FAO
= Needle thread trimmer
ENTK
= Unlocking the chain
FAU
= Bobbin thread trimmer
BIT0
= Speed limitation bit 0
FZ
= Thread puller
BIT1
= Speed limitation bit 1
PD
≥
1
= Pedal steps 1...12
PD
≤
-1
= Pedal steps –1 / -2
2 Putting into Service
Before putting the control into service, the following must be ensured, checked and/or adjusted:
The correct installation of the drive, position transmitter and accompanying devices, if necessary
The correct selection of the trimming operation using parameter 290
If necessary, the correct adjustment of the direction of motor rotation using parameter 161
The correct selection of functions of the keys (inputs) using parameters 240...249
The correct positioning speed using parameter 110
The correct maximum speed compatible with the sewing machine using parameter 111
The setting of the positions
The setting of the remaining relevant parameters
Start sewing in order to save the set values
See instruction manual for details!
