Efka euramot AB60D1472, Руководство пользователя

Страница: 40 / 68

EFKA AB60D1472
42
Mode 7 (overlock) parameter 232 = OFF (tape cutter) / parameter 018 = OFF (seam end with pedal in pos. –2 and
stop) without light barrier
ckL
c3
ST2/28
ST2/35
ST2/21
ST2/37
ST2/27
ST2/32
(AH)
ML
M3
M2
FL
M1
kLm
t3
ST2/20
+
POS.2
POS.1
-
1 0
n
-2
-1
1
/ 2
0
1
c1
kt3
c3 <
c1
t2
n2
2 4 3 5 6 7 8 9
n3 n1
kdF
kd1
c4
<
c4
t3
kt3
c2
c2
3
n4
1 2 6 4 5 7
n7
kLm
0 2 5 1 / M O D E- 7 e
t5 t4
kt1
kt2 kd2
Mark Function Parameter Control
Mode 7 290 = 7
Thread trimmer On Key S3
Sewing foot lifting at the seam end On Key S4
*) Counts c1, c2, c3 and c4 On 000...003
Light barrier Off 009 = OFF
Sequence “overlock mode with stop” 018 = OFF
Function “pedal in pos. –1 and –2” active in the seam 019 = 3
kLM Clamp at the seam end On 020 = ON
Start blockage with light barrier uncovered 132 = OFF
Stitch counting at the start of the seam at fixed speed n3 143 = 4
Stitch counting at the seam end at fixed speed n4 144 = 4
Seam end after count c2 191 = 1
Speed n5 effective after light barrier sensing 192 = OFF
Chainstitch with tape cutter M3 232 = OFF
n1 Positioning speed 110
n2 Maximum speed 111
n3 Speed for start counting 112
n4 Speed for end counting 113
n5 Speed after light barrier sensing 114
n7 Trimming speed 116
c2 End counting limited speed until stop 000
c1 Start counting limited speed 001
c3 Start counting tape cutter 002
c4 End counting tape cutter 003
LS Light barrier compensating stitches 004
ckL Run-out stitches clamp at the start of the seam 021
t2 Switch-on delay of sewing foot lifting with pedal in pos. -1 201
t3 Start delay from lifted sewing foot 202
t4 Full power of sewing foot lifting 203
t5 Pulsing of sewing foot lifting 204
kd1/kd2 Delay times of outputs M1/M2 280/282
kt1/kt2 ON periods of outputs M1/M2 281/283
kt3 ON period tape cutter M3 285
kdF Delay time until sewing foot On 288
*) If parameters 000...003 are set to “0“ , the respective counts are Off!