Instruction Manual
- 44 -
70 No function
71 No function
73...74
No function
7.19 Target stitching function/move to needle function by key
Function
with
or
without
control panel
Parameter
Target stitching function/move to needle function by key
Target stitch position
Number of steps (increments) for position change for each key press
Speed during target stitch/needle position move by key
Delay time with key held until continuous change in position
(PSt)
(P8E)
(ihr)
(nhr)
(dhr)
062
061
260
261
262
This function permits a key to be pressed in order to move to a target stitch position or an arbitrary needle
position. The keys used for this function can be connected to any programmable input on the control (in1...in13),
or a key (S1...S8) on the keypad module on the machine head (parameter
840...847
) can be assigned.
Move toward needle-up position
The needle position can be changed by pushing a key.
The input used for this function (in1...in13) and the rotational direction are selected using parameters
240...249,
239, 550, 551
, or a key (S1...S8) on the keypad module on the machine head (parameter
840...847
).
When the key is pressed
briefly
, i.e. no longer than the time set using parameter
262
, the handwheel rotates
by the steps set using parameter
260
.
When the key is
held down
, the handwheel rotates continuously until the key is released.
The handwheel rotates at the speed set using parameter
261
Move to target stitch position
The target stitch position can be triggered according to the approach of the needle position, but only when a key
whose
parameter value
has been set to
20
.
On the first push, the needle moves to the position set in parameter
061
.
240...249, 239, 550, 551 = 20
Direction of rotation corresponds to that of the machine
or
840...847
240...249, 239, 550, 551 = 21
Direction of rotation is opposite to that of the machine
or
840...847
260
Number of steps (increments) for position change for each key press
261
Speed during target stitch/needle position move by key
262
Delay time with key held until continuous change in position
7.20 Speed Limitation by means of External Potentiometer
Function
with
or
without
control panel
Parameter
Speed limitation by means of external potentiometer (maximum value)
Speed limitation using ext. potentiometer (minimum value)
Function “speed limitation using external potentiometer”
(toP)
(bot)
(Pot)
124
125
126
Содержание DC 1550
Страница 51: ... PF321A6012 51 For your notes ...