Efka DC 1550, Инструкция по эксплуатации

Страница: 10 / 52

Instruction Manual
- 10 -
Functions Parameter
Call-up of the Fast Installation Routine SIR (Sir) 500
Setting on the V810 control panel:

Input code number 3112 !

Press the E key

the lowest parameter
2.0.0. of this level appears

select 500

Parameter 5.0.0. displayed

Press the E key

the character [o] appears and flashes

Press the >> key

Parameter 2.9.0. appears (functional sequence "thread trimming
operations")

Press the E key

Parameter value 05 appears

Press the +/- key

The parameter value can be changed

Press the E key

Parameter 1.6.1. appears (Direction of motor rotation)

Press the E key

Parameter value
1 appears

Press the +/- key

The parameter value can be changed

Press the E key

Parameter 2.7.2. appears (transmission ratio)

Press the E key

Parameter value
100 appears

Press the +/- key

The parameter value can be changed

Press the E key

Parameter 2.7.0. appears (type of position sensor)

Press the E key

Parameter value 0 appears

Press the +/- key

The parameter value can be changed

Press the E key

Parameter
4.5.1. appears (position 1 leading edge, position 1 trailing edge
is automatically set at 60°)

Press the E key

Parameter value appears

Press the +/- key

The parameter value can be changed

or turn handwheel

Set position for at least 1 rotation.

Press the E key

Parameter 4.5.3. appears (position 2 leading edge, position 2 trailing edge
is automatically set at 60°)

Press the E key

Parameter value appears

Press the +/- key

The parameter value can be changed

or turn handwheel

Set position for at least 1 rotation.

Upon pressing the E key once more the program returns to parameter 290!

Press the P key twice

The system exits the SIR routine
Setting on the V820/V850 control panel:

Input code number 3112 !

Press the E key

the lowest parameter 2.0.0. of this level appears

select 500

Parameter
5.0.0. displayed

Press the E key

the character [o] appears and flashes

Press the >> key

Parameter 290 FAm 05 appears (functional sequence "thread trimming
operations")

Press the +/- key

The parameter value can be changed

Press the E key

Parameter 161 drE 1 appears (Direction of motor rotation)

Press the +/- key

The parameter value can be changed

Press the E key

Parameter
272 trr 100 appears (transmission ratio)

Press the +/- key

The parameter value can be changed

Press the E key

Parameter 270 PGm 0 appears (type of position sensor)

Press the +/- key

The parameter value can be changed

Press the E key

Parameter
451 appears (position 1 leading edge, position 1 trailing edge is
automatically set at 60°)

Press the +/- key

The parameter value can be changed.

or turn handwheel

Set position for at least 1 rotation.

Press the E key

Parameter
453 appears (position 2 leading edge, position 2 trailing edge is
automatically set at 60°)

Press the +/- key

The parameter value can be changed

or turn handwheel

Set position for at least 1 rotation.

Upon pressing the E key once more the program returns to parameter 290!

Press the P key twice

The system exits the SIR routine