EFI Pi6500 Pro, Руководство по настройке

Страница: 98 / 152

3
3-22 Setting up the Pi6500 Pro from a Windows Computer
Service Setup (Windows Printing Service)
For setting up the Windows printing service, these characters are allowed in the text
fields: uppercase letters, numerals, space, and the following characters:
- _ . ~ ! @ # $ % ^ & ( ) { } \ ' ,
N
OTE
:
Lowercase letters are not allowed, except in the Comment field.
Enable Windows Printing Service
—Select to enable SMB (Server Message Block), the
file and printer sharing protocol built into Windows. Enabling SMB allows the
Pi6500 Pro to be listed on the network so that Windows clients can print to a
particular print connection (Hold, Print, or Direct) on the Pi6500 Pro without any
other networking software. For information on how to set up a Windows client for
Windows printing, see Getting Started.
N
OTE
:
Windows (SMB) printing runs over TCP/IP, so TCP/IP must be configured on
the Pi6500 Pro and on workstations that use Windows printing.
N
OTE
:
Be sure the administrator configures the printer driver defaults before Windows
NT 4.0 clients install the printer driver with Point and Print. The Pi6500 Pro
Administrator name and Password are required during Point and Print installation if
you want to change defaults for the Windows NT 4.0 printer driver.
Server Name
—The server name is the name that will appear on the network. It can,
but does not have to, be the same name as the server name assigned to the Pi6500 Pro
(see page 3-2).
Comment
—You can enter information about the printer, up to 15 characters. These
comments are listed in the Properties of the Pi6500 Pro in Network Neighborhood.
Lowercase letters are allowed in this field.
Domain or Workgroup
—Enter the workgroup or domain where the Pi6500 Pro should
appear.
Ethernet WINS Server
—Enter the IP address of the Ethernet WINS name server.
Broadcasts from SMB devices cannot be routed beyond their original network segment
without a WINS name server. Setting up the WINS name server is outside the scope of
this manual. To find out if a name server is available, contact your network
administrator.