EFI Pi6500 Pro, Руководство по настройке

Страница: 75 / 152

2
2-45 Administrative functions in the Setup menu
Change Password
Change Password enables you to set or change the Administrator password for the
Pi6500 Pro. This password determines whether a user can modify the Setup options.
When the Pi6500 Pro is installed, there is no password. If you do not create an
Administrator password, users are not required to enter a password to modify Setup.
If an Administrator password has been set previously, you are required to enter it right
after Start Up, when you choose Run Setup. Use the up and down buttons to select
the characters and the left and right arrows to move between them (see page 2-4).
T
O CHANGE THE
P
I
6500 P
RO PASSWORD
1. Scroll the main Setup menu and choose Change Password.
2. Enter and confirm the password as described in the following section.
New Password
The password can be any combination of letters and numbers up to 19 characters.
Choose OK when you are done. Be sure to keep track of the password.
N
OTE
:
The only way to remove a password that you cannot remember is to reinstall
system software.
Verify New Password
Enter the new password again exactly as before to verify that you have entered it
correctly. The new password is effective until you change it again.
Clear Server
Clear Server enables you to clear all queued print jobs from the Pi6500 Pro—jobs in
the Pi6500 Pro Print, Hold, and Printed queues. The Job Log is cleared at the same
time. If you keep Job Logs, be sure to print or export the Job Log before you choose
Clear Server.
Scroll the main Setup menu and choose Clear Server. You are asked to confirm your
selection. Jobs can also be deleted, individually or as a group, from Fiery WebSpooler.