EFI Pi6500 Pro, Руководство по настройке

Страница: 63 / 152

2
2-33 Network Setup options
N
OTE
:
Be sure the administrator configures the printer driver defaults before Windows
NT 4.0 clients install the printer driver with Point and Print. The Pi6500 Pro
Adminstrator name and Password are required during Point and Print installation if
you want to change defaults for the Windows NT 4.0 printer driver.
Use Automatic Configuration
Yes/No [Yes]
This option appears if you chose DHCP or BOOTP as the protocol for automatically
obtaining the IP address of the Pi6500 Pro (see page 2-16).
Choose Yes to have the Pi6500 Pro use a WINS name server and automatically obtain
its IP address. After making your choice, you proceed to the Server Name option.
Choose No to proceed to the Use WINS Name Server option, where you specify
whether to use a WINS name server, and then to the WINS IP Address option, where
you specify its IP address.
Use WINS Name Server
Yes/No [No]
Setting up the WINS name server is outside the scope of this manual. To find out if a
name server is available, contact your network administrator.
WINS IP Address
This option appears only if you chose Yes for Use WINS Name Server. Enter the
IP address of the WINS Name Server.
Server Name
Default name
The server name is the name that will appear on the network for accessing the
Pi6500 Pro via SMB. This name can be up to 15 characters long. The default name is
the same as the server name assigned in Server Setup (see page 2-7).
Server Comments
Server comments (optional) can contain information about the printer. These
comments are listed in the Properties of the Pi6500 Pro in Network Neighborhood.
Comments can be up to 15 characters long.