User Manual
26
6.1 Setup-Technicians Only
NOTE:
To access to this area is for fully qualified and accredited technicians only.
Enter menu "SETUP" need password.
Select "SETUP" from the Main Menu. The screen will require the password as below.
Figure 6.4 Enter password
The default password is "0000". Please press "ENTER" to move the cursor backwards or
confirm the setting, press "up" /"DOWN"to select the number, press "ESC" to move the cursor
forward or return to the Main Menu.
After enter the correct password the Main Menu will display a screen and be able to access
to the following information,You can also continue to access the next menu level.Password
can be changed through item 11.
NOTE:
"POWER FACTOR" mode is selected by default, and "QU WAVE" or other
modes can be selected through this page.
