User Manual
16
Figure 4.8 Disassemble the Connector Cap nut
2. Insert the wire into the connector cap nutand contact pin.
Figure 4.9 Insert the Wire into the Connector Cap nut and contact pin
3. Crimp the contact pin to the wire using a proper wire crimper.
Figure 4.10 Crimp the contact pin to the wire
4. Insert the contact pin to the top part of the connector and screw up the cap nut to the top
part of the connector.
Figure 4.11 Connector with Cap nut Screwed on
5. Then connect the DC connectors to the inverter. Small click will confirm connection.
С
rim ping plier
