EFA dehider Original operating instructions
EN
Rev.00
– 10.2020
16 of 24
Regrinding on a grinding machine is not possible.
6) Lubricate and mount the blade and dehider as described in
chapter 8
– Cleaning and lubrication
.
Blade guide check
(see Fig. 7.5)
The check must be carried out with the device running
without a blade
.
The holding fixture (1) is pushed upwards in the direction of the arrow
(detail -1-) by the escaping compressed air.
The top edge of the holding fixture (1) must be flush with the top edge of
the housing guide (2) (detail -2-).
If this is not the case, the shim (3) must be exchanged (by specialist
personnel from
S&W
).
This reduces wear on the blade cover.
Important!
The countersunk screw (4) is secured with
Loctite and should only be loosened by
specialist personnel from
S&W
!
Fig. 7.4
– Sharpening the blade
Detail -1-
2
1
3
Detail -2-
1
2
4
Fig. 7.5
– Checking the blade
guide (EFA 2000)
