EEZ RV EezTire E518, Руководство пользователя, Страница: 9 / 35

9
Example: Front Axle Tire Pressure is: 100 psi High-Pressure Alarm
Setting will be: 120 psi (100 psi x 1.20 (or 20%) = 120 Low-Pressure
Alarm Setting will be: 90 psi (100 psi x .9 (or 90%) = 90
These are industry standards for the initial set-up. Some adjustment
may be needed on your first trip.
For the temperature, it is recommended leaving it at the factory
default of 158 degrees F.
STEP 2: Choosing Pressure and Temperature
Unit of Measure:
PRESS and HOLD the SET button for 3 seconds until you hear the
beep. You will see PSI flashing on the left side of the screen. Press the
set button again and you can change to BAR by pressing the + or
– key
to scroll between the two. When the one you want to use appears in
the screen press and release the SET button. (Pressing and releasing
the SET button in this mode is like saying yes to what the screen is
showing you)
Press the set button again and “F” will be flashing. Press + or – to
change to “c” if you like. The next time that you press the set button
the front axle will be flashing and the words “ HIGH PRESSURE ” will be
displayed. Follow the instructions below.
STEP 3: Choosing per Axel High and Low
Parameters: