EEZ RV EezTire E518 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 35

EEZ RV EezTire E518 Скачать руководство пользователя страница 16

16

unscrewing the two halves. Mount the inner sensor on the valve
directly.

DELETING SENSOR ID

1. In operating mode, press and hold the CODE button for 3 seconds,
and ID code are  displayed. Press the + or - button to select the
desired tire.

2. Press and hold the SET button for 3 seconds. A double-beep sound
will be issued, and you will see FFF FFF after the sensor code is
deleted successfully. Use the + or

–

key to go to the next tire that you

want to delete. To return to operating mode, press and hold the

“CODE” button

for 3 seconds until you hear a beep.

OTHER FUNCTIONS

Typical Scrolling Display During normal operation, the monitor scrolls
through and shows the tires one by one for approximately 6 seconds.
A single audible chirp will be issued if the monitor does not receive
one of the sensors data for more than 30 minutes. You can manually
scroll through and select the tire by pressing the + or

–

button.

Backlight and Motion Sensor

The monitor has a built-in light and motion sensor. The backlight
turns on when it detects the vehicle is in motion and when it is dark
enough or you may wave your hand in front of the monitor to activate
it. Press any button on the monitor to turn on the backlight manually.

To turn it off manually press and hold the + button for 3 seconds.

«
...
14
15
16
17
18
...
»

Содержание EezTire E518




































Отзывы:

Нет отзывов