EEZ RV EezTire E518 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 35

EEZ RV EezTire E518 Скачать руководство пользователя страница 5

5

Monitor Components & Icons

This EEZ RV PRDUCTS EezTire E518 Tire Pressure and Temperature Monitoring System (TPMS) is a heavy-
duty versatile system designed to operate on a variety of vehicles. (i.e. Motor Coach, 5th Wheel, Travel
Trailer, Auto, Trailer, Big Rig, Farm and Mining Equipment).

SYSTEM OVERVIEW

The system comes with a monitor that can handle 26 wheels with pressures up to 210 psi. The sensors
are lightweight and do not affect the tire balance and have easy to change replaceable cr1632 batteries.
The system offers a method of dropping either the towing vehicle or the towed vehicle separately. This
allows you to monitor the towing vehicle without a towed or the towed when driving away from the
towing vehicle.

The monitor scrolls automatically through each wheel measuring tire pressure and temperature,
displaying it on the monitor. Alarms can be preset by the operator so visible and audible alarms can
warn the driver of a catastrophic failure (rapid air pressure loss), high or low pressures and high
temperature. The alarms and monitoring are sent wirelessly in real time to the cab allowing the
operator to monitor tires that are out of their vision. The audible alarm eliminates the need to watch
the monitor continually.

Tire Pressure can be displayed in PSI or Bar and temperature in Fahrenheit (F) or Celsius (C). Pressure
alerts can be set to a different pressure setting for each axle, so additional towed trailers or vehicles are
no problem. An optional booster can be purchased from your dealer or at

www.eezrvproducts.com

if

you have signal loss due to distance, structural or electronic interference.

«
...
3
4
5
6
7
...
»

Содержание EezTire E518




































Отзывы:

Нет отзывов