Charging the Monitor
The lithium-ion battery inside the monitor, when fully charged is capable of
running for up to 60 hours between charges. When the battery symbol bars
are gone, or the box appears, a recharge is required.
OUT OF PARAMETER ALERTS
The system cycles from tire to tire every 6 seconds, if there is a significant
change in pressure or temperature in this cycle it will transmit it to the
monitor. If not, it will maintain the reading and transmit a full update every 5
minutes. This is to conserve the sensor battery. If any reading goes out ofthe
pre-defined parameter, the system will interrupt the cycling and give you a
real-time alert; you will notice three things:
1. An audible alarm;
2. The red light on the lower right side of the monitor will flash;
3. The corresponding tire on the monitor will flash, and a text message of
what is wrong will appear on the screen.
Press any button to switch the alarm off. However, the red light will not be turned off
until the correct pressure, and temperature settings are restored to within range.
When the sensor detects High-Pressure
in a tire, it will send an alert to the monitor
immediately.
HIGH-PRESSURE
will show
on the LCD and the corresponding tire
icon will flash. The audible alarm will be on
together with the flashing red light. Press
any button to turn off the alarm. However
the flashing red light and text will continue
until the problem is corrected.
Low-Pressure Alert
When the sensor detects Low-Pressure in
a tire, it will send an alert to the monitor
immediately.
LOW-PRESSURE
will show
on the LCD and the corresponding tire
icon will flash. The audible alarm will be on
together with the flashing red light. Press
any button to turn off the alarm. However
the flashing red light and text will continue
until the problem is corrected.
- - - - - - - - - - - - -
17 - - - - - - - - - - - - -