DE285 HD Caption Decoder/VANC Monitor
2.
Installation
2.1.
Front Panel
The DE285 front panel is shown below, followed by a brief guide to its
functions.
Power On LED
The Power On LED will light steady green when
the unit is powered on.
Active Button
Toggles the Decoder between active operation
(LED on) and Relay Bypass mode (LED off). In
Relay Bypass mode, the signal at the Program
video input is routed directly through to the Pro-
gram video output, with no on-screen display cre-
ated. All other inputs and outputs are inactive
and the web analysis tools cannot be used.
Control Pad
The Control Pad navigates menus and changes
settings in the front panel configuration menus.
The control pad buttons are:
ENTER
(marked
by a check),
CANCEL
(marked by an X),
LEFT,
RIGHT, UP
and
DOWN
. In most configuration
menus, use
LEFT
and
RIGHT
to navigate be-
tween parameters,
UP
and
DOWN
to change the
value of the selected parameter,
ENTER
to se-
lect a category or save a change, and
CANCEL
to return to the previous menu without saving
changes. See Front Panel LCD Menu in Decoder
Operation for further details.
USB Port
A front panel USB port is provided to enable
quick and easy software upgrade.
4
Copyright ©2009-2011 EEG Enterprises, Inc.
All rights reserved.
