DE285 HD Caption Decoder/VANC Monitor
Set Layout
Allows you to choose a layout from the list of
available layouts.
Use the
LEFT
and
RIGHT
keys to select the name of the layout, then press
ENTER
to exit and apply changes or
CANCEL
to
exit and cancel changes.
Update
The Update utility allows you to upgrade your
firmware to the most recent version. Begin by
downloading a firmware update file from the EEG
website to any USB memory device. Insert the
memory stick into the front panel USB port, navi-
gate to the Update option, and press
ENTER
. The
update utility will find the installation file on the
memory device, display the revision number, and
prompt you to continue. Press
ENTER
to pro-
ceed and install the new firmware, or
CANCEL
to end the utility. A message will appear on the
LCD screen when the update utility has finished.
Do NOT remove the memory device while the
update utility is running.
When the update
utility is finished, the new firmware is completely
installed; there is no need to reboot the unit. De-
pending on the size and type of memory device
used, there may be a momentary delay before the
device is detected. If you see “Cannot Update: In-
sert USB Disk”, wait a few seconds and try again.
Copyright ©2009-2011 EEG Enterprises, Inc.
All rights reserved.
11
