EEC ESD-140, Руководство по эксплуатации

Страница: 22 / 43

18
LCD Contrast
The numbers 0 through 9 correspond to the different contrast settings, 0 meaning the
lightest color of displayed characters and 9 meaning the darkest color of displayed
characters. After the “+” soft key is pressed the display will automatically adjust to the
new display setting.
Results
Selects the type of results you would prefer to have displayed at the end of a test or
sequence of connected test steps. The available selections are: All, P/F and Last.
When All is selected, a Results Summary screen will be displayed at the end of the
test or sequence of connected test steps displaying the results of all of the test steps.
The Results Summary screen will appear as follows:
When P/F is selected, a Pass or Fail screen will be displayed at the end of the test.
The Pass and Fail screens will appear as follows:
When P/F is selected, it is not possible to see the test results directly at the end of the
test. In order to review the test results refer to section
4.2.3. Reviewing Test Results.
When Last is selected, the results of the last test step performed will be displayed on
the Perform Tests screen. There will not be a change in appearance or special
screen displayed in this mode.
Lock
Turning Lock ON restricts access to parameter and system settings. The level of
security is determined by the Mem Lock function.
Mem Lock
Mem Lock is a sub-function of the Lock setting. In order for the Mem Lock function to
work, the Lock must first be turned ON. Turning the Mem Lock OFF will allow the user
to access all available memory locations but restricts access to memory and step
editing capabilities. Turning the Mem Lock ON will allow the user to only run the