EEC ESD-140, Руководство по эксплуатации

Страница: 11 / 43

7
and Dielectric Withstand tests, or run both
simultaneously.
FOUR WIRE MEASUREMENT
(KELVIN METHOD) AND
MILLIOHM OFFSET
CAPABILITY
The Kelvin four wire measurement technique
eliminates test lead resistance. The milliohm
offset function allows for the use of longer test
leads without compromising the test results.
PLC REMOTE INPUTS AND
OUTPUTS
Two standard 9 pin interfaces provide inputs and
outputs for simple PLC relay control. Outputs
include: PASS, FAIL, RESET and TEST IN
PROCESS signals. Inputs include: TEST,
INTERLOCK, RESET and remote recall of
MEMORY 1, 2 and 3.
WITHSTAND PROCESSING
INDICATOR As a safety precaution, the enhanced graphic
LCD indicates when the high voltage from the
7100 series is being applied to the device under
test
SOFTWARE CALIBRATION
CONTROL
ESD can be completely calibrated without
removing any covers and exposing the technician
to hazardous voltages.
NO LOAD SETUP OF
OUTPUT CURRENT Set output current parameters without activating
the output.