Edwards EXPT, Инструкция по эксплуатации

Страница: 17 / 36

© Edwards Limited 2009. All rights reserved. Page 11
Edwards and the Edwards logo are trademarks of Edwards Limited.
Installation
B723-00-880 Issue C
3 Installation
3.1 Safety
z
When you refer to a manual supplied as a Supplementary Publication, you must obey all of the WARNING and
CAUTION instructions in the manual.
z
A suitably trained and supervised technician must install the EXPT Pumping Station.
z
Check that all the required parts are available and of the correct type before you start work.
z
Ensure that the installation technician is familiar with the safety procedures which relate to the products
pumped. Wear the appropriate safety-clothing when you come into contact with contaminated components.
z
Isolate the other components in your system from the electrical supply so that they cannot be operated
accidentally.
z
Do not reuse O-rings and Co-Seals if they are damaged.
z
Dispose of components, grease and oil safely (refer to Section 6 ).
z
Take care to protect sealing-faces from damage.
z
Leak-test the system after installation and seal any leaks found.
3.2 Unpack and inspect
Remove the outer cover and all packing materials, remove the protective covers from the inlet and outlet ports,
inspect the system for any damage. If the EXPT Pumping Station is damaged, notify your supplier and the carrier in
writing within three days; state your order number and invoice number. Retain all packing materials for inspection.
Do not use the EXPT Pumping Station if it is damaged. Check that your package contains the items listed in
Table 9 .
If any item is missing, notify your supplier within three days.
If the EXPT Pumping Station is not to be used immediately, replace the protective covers. Store the EXPT Pumping
Station in suitable conditions as described in
Section 6.1 .
WARNING
Obey the safety instructions given below and take note of appropriate precautions. If you do not,
you can cause injury to people and damage to equipment.
Table 9 - Checklist of components
Qty Description Check (
✓
)
1 EXPT Pumping Station
❏
1 Instruction Manual Package
❏
1 Logic Interface Interlock D-Connector
❏
1 TMP Flange Inlet Seal
❏
1 Rotary Pump Oil (RV/E2M pumps only)
❏
1 XDS Silencer (optional on systems with XDS pumps)
❏