hurricane SB120
2010
23/23
10 T
ROUBLE
S
HOOTING
Do not operate the machine with damaged parts or if the controls are not
functioning properly.
Defects at the wall saw must be repaired by
EDT EURODIMA or an authorized dealer.
Problem
Cause
The machine will not run
even though all the
connections are in place
- Ensure that the emergency stop button on the remote control or
the BC120 is unlocked
- Incorrect supply voltage
- One phase missing
- Damaged cable or plug
- Extension cord gauge too small
- Damp plug connections (short circuit)
Machine stops during
operation
- Not enough cooling water
- Supply voltage fluctuations
- Motor temperature too high due to motor overload
Drive motor turns, saw
blade does not turn
- Safety coupling
11 L
IABLILITY AND
W
ARRANTY
Unauthorized modifications and changes to the machine as well as non-observance of the operating
instructions void the manufacturer's liability for resulting damage.
We only warrant error-free operation for original replacement parts manufactured by EDT EURODIMA
GMBH. Any guarantees and warranty become void if machines or machine parts have been opened.
This warranty is valid on condition that the machine is used, handled, maintained and cleaned
according to the operating instructions.
Claims under the warranty will be recognized up to 12 months from the date of purchase (invoice date).
The warranty includes the repair or replacement of defective parts free of charge. Parts subject to
normal wear are excluded from this warranty.
EDT EURODIMA is not liable for direct, indirect or consequential damage from defects, loss or
expenses in connection with or resulting from the unsuitability of the device for a specific purpose.
Implied assurances of use or suitability for a specific purpose are expressly excluded.
