hurricane SB120
2010
17/23
7.13 Electric connection
The specifications for the electrical connection can be found
on the rating plate and in the user manual.
Always observe the correct sequence:
At start-up first connect the motor cable and the
remote control, then connect the mains plug.
Please note: After switching off the machine, first disconnect the mains plug, then the motor cable
and the remote control.
The electrical connection between the BC120 and the drive motor must be carried out according
to the BC120 user manual. The karabiner at the motor end of the cable must be hooked onto the
main saw head in order to ensure that the cable remains tension-free.
Connection plug hurricane
Plugging and securing cable A-40S
Connect stress relief
hurricane SB120, completely connected
All the plugs are coded and each is designed differently to prevent confusion. Never
attempt to connect a plug with force!
Secure all the plugs prior to starting up the wall saw. Always close the protective caps
after removing the connecting cables in order to keep electrical connections clean.
Bent or broken connection pins must be immediately replaced with new ones. Electric repairs
may only be carried out by EDT EURODIMA GMBH or its authorized dealers.
