4-17
knob on the E8302 module is turned to "A" then the display will show the value of input
A + (C - D). If the "INPUT" knob on the E8302 module is turned to "B" then the display
will show the value of input B + (C - D). If the "INPUT" knob on the E8302 module is
turned to "AB" then the display will show the value of input A + B + (C - D).
As an other example consider a Trendsetter II with LVDTs A and B used to measure the
diameter of a part with the "INPUT" selection knob set to AB to display the results of A
+ B. The A and B outputs are bussed out on pin 1 and 2 respectively by setting the "A
OUT" and "B OUT" jumpers. An interface cable, Edmunds #4550200, is connected from
the Input/Output "A" plug on the rear of the Trendsetter II to the Input/Output "B" plug
of a second Trendsetter II with an E8302 module. The E8302 module in the second
Trendsetter II is setup to buss in the signal from the first column with jumper "CIN VAR"
set to "1", "DIN VAR" set to "2" and J6 and J7 set to "E". Additionally jumper J8 set to
"C-D" and J9 is set to "+" so that the result of C and D is (C-D). If the second
Trendsetter II also has an LVDT input connected to input A then value displayed can be
controlled with the "INPUT" selection knob. If the "INPUT" knob is set to "A" then the
display will show the value of A + (C-D). If the "INPUT" knob is set to "B" then the
display will show the value of B + (C-D), however since no B input is connected the
display will show the value of C-D. If the "INPUT" knob is set to "AB" then the display
will show the value A + B + (C-D), however since no B input is connected the display
will show the value A + (C-D).
Содержание Trendsetter II
