Edirol UR-80, Руководство пользователя, Страница: 50 / 396

50
Controlling your software
Master Control section
fig.ProMasterControl_50
Cursor buttons
These buttons switch the track bank that is controlled by the
UR-80’s track controls.
Function buttons
*Button names in square brackets [ ] indicate that you press the button
while holding down the SHIFT button.
JOG dial
If the Scrub function is on, turning the dial will move the cursor.
Transport buttons
These buttons perform the following functions.
Button Function
Return the track bank by 1 track.
Advance the track bank by 1 track.
Move to the next track bank.
Move to the preceding track bank.
Button Function
EDIT [DP] Open the Editor window.
[PT] Open the Track window.
[MEM LOCT] [DP] Open the Marker window.
[PT] Open the Memory Location window.
MIXER Open the Mixer window.
[TRANS-
PORT] Open the Transport window.
IN Set the current position as the Auto Record Start point
(punch-in).
[PRE] [DP] Set the current position as the Loop Play Start point.
[PT] Switch pre-roll on/off.
OUT Set the current position as the Auto Record End point
(punch-in).
[POST] [DP] Set the current position as the Loop Play End point.
[PT] Switch post-roll on/off.
UNDO Undo the previously executed operation.
[EDIT
MODE] [DP] Open the Nudge window.
[PT] Switch the edit mode.
SAVE Save the current project in a file.
[EDIT TOOL] [DP] Open the Track window.
[PT] Switch the Edit tool.
Button Function
Turn the Scrub function on/off.
Rewind the cursor.
Fast-forward the cursor.
Stop playback/recording.
Start playback.
Start recording.