20
L2TP xDSL
Your ISP requires you to use a Layer Two Tunneling
Protocol (L2TP)
Telstra Big Pond This Protocol only used for Telstra Big Pond Internet
service in Australia
Click on one of the WAN type and then proceed to the manual’s relevant
sub-section (
1.1
,
1.2
,
1.3
,
1.4
,
1.5
or
1.6
). Click on
Back
to return to the
previous screen.
1.1 Cable Modem
Choose Cable Modem if your ISP will assign you with an IP address
automatically
(i.e. DHCP)
. Some ISP’s may also require that you fill in
additional information such as host name and MAC address (see screen
below).
Note
: The Host Name and MAC address section is
optional
and you can skip
this section if your ISP does not require these settings.
Parameters
Description
Host Name
If your ISP requires a Host Name, type in the host name
provided by your ISP, otherwise leave it blank if your ISP
does not require a Host Name.
MAC Address
Your ISP may require a particular MAC address to
connect to the Internet. This MAC address is the PC’s
MAC address that your ISP had originally connected your
Internet connection to. Type in this MAC address in this
