43
from network loop happened in the
LAN ports.
DHCP Server Enabled You can enable or disable the
DHCP server. By enabling the
DHCP server the router will
automatically give your LAN clients
an IP address. If the DHCP is not
enabled then you’ll have to
manually set your LAN client’s IP
addresses; make sure the LAN
Client is in the same subnet as this
broadband router if you want the
router to be your LAN client’s
default gateway
Lease Time
The DHCP when enabled will
temporarily give your LAN clients an
IP address. In the Lease Time
setting you can specify the time
period that the DHCP lends an IP
address to your LAN clients. The
DHCP will change your LAN client’s
IP address when this time threshold
period is reached
IP Address Pool
You can select a particular IP
address range for your DHCP
server to issue IP addresses to your
LAN Clients.
Note:
By default the IP range is from: Start IP
192.168.2.100
to End IP
192.168.2.199
. If you want your
PC to have a static/fixed IP address then you’ll have to
choose an IP address outside this IP address Pool
Domain Name
You can specify a Domain Name for your LAN
Click <
Apply>
at the bottom of the screen to save the above
configurations. You can now configure other advance sections or start
using the router (with the advance settings in place)
