74
Note:
You need to give your LAN PC clients a
fixed/static IP address for the Access Control
rule to work properly.
Client PC Service
You can block the clients from accessing some
Internet services by checking the services you
want to block.
Protocol
This allows you to select UDP, TCP or both
protocol type you want to block.
Port Range
It can be assign up to five port ranges. The
router will block clients from accessing Internet
services that use these ports.
Apply Changes
Click “Apply Changes” to save the setting.
Reset
Click “Reset” to clear all fields.
Click <
Apply Changes>
at the bottom of the screen to save the above
configurations. You can now configure other advance sections or start
using the router (with the advance settings in place)
Example: Access Control
In the example below, LAN client A can only access websites that use Port
80. However, LAN client B is able to access websites and any other
service that uses ports between 80 and 999.
