EdilKamin MILLA H 12, Руководство по установке, использованию и техническому обслуживанию, Страница: 38 / 44

38
ENGLISH
If problems occur, the product shuts itself off automatically.
The display will show the reason (see below).
TROUBLESHOOTING
USER/INSTALLER
MESSAGE PROBLEM SOLUTION
H01
displays when the combustion
air intake is below the set level
• Check that the combustion chamber door is closed
• Check the regular maintenance of the stove
• Check that smoke discharge and combustion air
ducts are clean.
H02
displays when the logic board
does not detect the correct
smoke fan speed
• Contact the technician
H03
displays when the thermocouple
detects a smoke temperature
lower than the set value and
interprets this as the absence of
flame
• Check that there are pellets in the tank
• Check if the water temperature has increased due to
the closing of a valve (contact the technician)
• Contact the technician
H04
displays when ignition times out
unsuccessfully
There are two possibilities:
NO flame:
• Check that the grate is seated properly and is clean
• Check that there are pellets in the tank and grate
• Use a piece of solid paraffin to light the stove (contact
the technician first)
Flame present:
• Contact the technician
H05
Shut down due to air flow rate
sensor breakage
• Contact the technician
H06
displays when the logic board
determines that the smoke
temperature probe is broken or
disconnected
• Contact the technician
Do not disconnect from the power supply.
To start the product up again, allow the shut-down procedure to complete, then press the
ON/OFF button.
Before starting the product up again, check the reason for the shutdown and CLEAN THE
GRATE.
The product is equipped with a safety valve but, if the grate is not cleaned regularly as
explained above, ignition may involve a small detonation. If white smoke forms in the
combustion chamber for a long time, disconnect the mains supply and wait 30 minutes
before opening the door and emptying out the grate.
SHUTDOWN MESSAGES AND THEIR SOLUTIONS: