6400LF Converged Network Appliance Installation Guide
21
Install Chassis in Rack
CAUTION
Lifting the chassis and attaching it to the rack is a two-person job. If needed, use an
appropriate lifting device. A fully loaded SR1400 server weighs approximately 13.9
kg (30.6 lbs.) and a fully loaded SR2400 server weighs approximately 23.4 kg (51.5
lbs.).
1. Locate one person at the front of the rack and one at the rear.
2. Position the chassis so that the L brackets (Figure 12, A) are inserted into
the chassis mounting brackets (B).
3. While supporting the weight of the chassis, adjust the L brackets to fit tightly
into the chassis brackets (C).
Figure 11: L Brackets Inserted into Chassis Mounting Brackets (Front View)
1. Slide the chassis toward the front of the rack until the front of the chassis mounting
brackets contact the rear of the center posts.
2. Using the screws (Figure 13, C) supplied with your rack, attach the front of the
mounting brackets to the front of the center posts.
3. You have completed the mid-mount installation of your chassis in a two-post rack
system.
