6400LF Converged Network Appliance Installation Guide
17
Install Chassis Handles
NOTE:
The handles are required to hold the bezel on. If you will not be installing a bezel,
you do not need to install the handles.
1. Slide a handle (Figure 7, A) between the chassis and the chassis bracket.
2. Align the hole in the handle with the unused hole in the chassis bracket.
3. Install a spacer (B) between the handle and the chassis bracket.
4. Install and tighten screw (C) to secure the handle.
5. In the same manner, attach the other handle to the opposite side.
You have completed the installation of your chassis in a four-post rack system.
A
Chassis handle
B
Spacer
C
#10-32 x 7/8 – inch screw with washer
Figure 7: Attaching a Chassis Handle to a Front Post
