Edgetech PORT LF, Руководство пользователя по оборудованию

Страница: 15 / 79

xv
LIST OF FIGURES
Figure 2-1: PCB Connectors ....................................................................................................................... 2-2
Figure 2-2: PORT-LF Mechanical (Standard) - 0010815 ............................................................................. 2-5
Figure 2-3: PORT-LF DEEP Mechanical- 0019564 ....................................................................................... 2-6
Figure 4-1: Unscrew the Anti-Rotation Block to Remove it ....................................................................... 4-1
Figure 4-2: Pulling the Purge Port Plug ...................................................................................................... 4-2
Figure 4-3: The Kynar Retention Rod ......................................................................................................... 4-3
Figure 4-4: Pulling the Kynar Rod from the Housing ................................................................................. 4-4
Figure 4-5: The Release End Cap being Pulled Free from the Housing ...................................................... 4-4
Figure 4-6: Connecting the Battery Pack to the JP3 Head Connector ....................................................... 4-5
Figure 4-7: The Proper Connection Between the Battery Connector and JP3 Head Connector ............... 4-5
Figure 4-8: The Proper Alignment of the Motor Cable in the Electronics Chassis Support Bracket .......... 4-6
Figure 4-9: Consider the Grounding Spring When inserting the Release End Cap .................................... 4-7
Figure 4-10: Guiding the Electronics Assembly back into the Housing ..................................................... 4-7
Figure 4-11: Lightly Press the Grounding Spring to Guide it into the Housing ......................................... 4-8
Figure 4-12: The Bare Aluminum Band ...................................................................................................... 4-8
Figure 4-13: The Proper Alignment of the Release End Orientation Key .................................................. 4-8
Figure 4-14: Ensure Unit is Firmly Closed .................................................................................................. 4-9
Figure 4-15: Replacing the Kynar Retention Rod ..................................................................................... 4-10
Figure 4-16: The Fully Inserted Kynar Retention Rod .............................................................................. 4-10
Figure 4-17: Replace the Purge Port Plug ................................................................................................ 4-11
Figure 4-18: Replace the Anti-Rotation Block using the Two Nylon Screw ............................................. 4-11
Figure 4-19: Remove the Anti-Rotation Block by Unscrewing the Two Nylon Screws ............................ 4-13
Figure 4-20: A Clean Release Shaft .......................................................................................................... 4-14
Figure 4-21: Thread the Release Link onto the Shaft ............................................................................... 4-14
Figure 4-22: Replace the Anti-Rotation Block using the Two Nylon Screws ............................................ 4-15
Figure 6-1: The Fully Assembled PORT-LF .................................................................................................. 6-1
Figure 6-2: The Transducer Cable Connected to the JP1 Header Connector ............................................ 6-2
Figure 6-3: Remove the Kynar Rod from the Slot ...................................................................................... 6-2
Figure 6-4: Gently Pull the Transducer End from the Housing .................................................................. 6-3
Figure 6-5: The Bare Aluminum Ring Within the Housing ......................................................................... 6-4
Figure 6-6: Feed the Transducer Cable from Transducer Side of the Housing to the Release Side .......... 6-5