EdgeStar GRL270IBLP, Руководство пользователя

Страница: 37 / 50

37
2. Use a bristled brush and run it through the orifices of the burner several times.
3. Go over the exterior of the burner with a wire brush several times to loosen debris and residue.
You may also wipe it with a terry cloth or damp rag without using any chemicals. For stubborn
scale, you may use a scraper.
4. Look at all burner ports (the small openings) and run a pipe cleaner or thin wire through them. Go
over the exterior of the burner with a wire brush several times to loosen debris and residue.
5. Analyze the burner for corrosion and any damage caused by corrosion.
6. Inspect ignition and burner orifices for corrosion and built-up of other residues.
Valve
Burner Orifice
Ignition Orifice
Cleaning the Infrared Burner(s)
The most effective way to clean your infrared burner(s) is to allow it to burn on the HIGH setting for
five to 10 minutes. The infrared burner achieves high temperatures and will burn off most food and
debris.
You may also use a wire brush to scrub away hardened grease and debris. You may remove each
infrared burner from the firebox using the instructions on the prior page. Cotter pins must be removed
from the cast pegs.